Optimus - Katadyn Products Inc. 110/MODEL 60 User Manual download pdf (Page 13)

13

VCR SETUP

SETTING THE 3 CH. 4 SWITCH

If you connected the VCR’s

OUT TO TV

termi-

nal to a TV or another VCR, set the VCR’s

3 CH. 4

switch (on the back of the VCR) to

3

or

4

, whichever is not an active channel in your

area.

When VCR appears on the display, the VCR

sends the signal from the video source con-

nected to its

IN FROM ANTENNA

or

AUDIO 1/

VIDEO 1 IN

(or

AV2

for the Model 60) terminals

to the TV on the channel you selected.

Note:

The

3 CH. 4

switch has no effect on the

TV when the VCR is off or if you connected a

TV with separate audio/video input jacks to the

VCR’s

AUDIO 1/VIDEO 1 OUT

jacks.

REMOTE CONTROL

Installing the Batteries

The remote control requires two AA batteries

(not supplied). For the longest operation and

best performance, we recommend alkaline bat-

teries (such as RadioShack Cat. No. 23-557).

Cautions:

• Use only fresh batteries of the required

size and type.

• Never leave dead or weak batteries in the

remote control. Batteries can leak chemi-

cals that can damage your remote control.

• Dispose of dead batteries promptly and

properly; do not bury or burn them.

1. Press the tab on the battery compartment

cover and lift off the cover in the direction

of the arrow.

2. Put fresh batteries in the compartment, as

indicated by the polarity symbols (+ and –)

marked inside.

3. Replace the cover.

Note:

If the remote control does not work or

operates poorly, replace both batteries.

Using the Remote Control

To use the remote control, aim it at the front of

the VCR and press the desired function but-

tons.

16-547.fm Page 13 Tuesday, July 20, 1999 4:45 PM

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Comments to this Manuals

No comments